Max load weight :8000mm Cnc Deep Hole Drilling Machine Making An Deep Hole 1300mm
Resin sand cast machine body base,which is twice quench treated.
Imported ball screw and linear way rail , it run with high precision servo motor
It is a special deep-hole drilling operating system, which is powerful, simple operating, stable and durable. Main advantages:
Multi - segments processing automatically: It will adjust the feed rate automatically according to the processing schedule.
Logical control processing: The processing situation is monitored and the processing specification will be adjusted automatically if any unusual.
The highly sensitive monitoring equipment will sound a alarm if any unusual errors and stop processing, which is safe and found intuitively.
Multiple operation. There are optional modes: man-machine dialogue mode, machine programming mode and remote transmission mode.
Applicable for various type deep hole drilling like:
1. Plastic molds (including water injection holes, hot runners, center holes)
2. Automobile parts (including crankshafts, hydraulic pipes etc.)
3. Applicable for various of stick rod workpiece deep hole drilling,
4.widely used in machining of CRH trains spare parts,
5.internal combustion engine parts,nuclear power pipeline,
6.stainless steel connections,silverworks,motor shaft,
|Number of drilling spindle ||Uniaxial |
|Inner diameter of drilling ||2.5-35mm|
|Max depth of drilling ||1300mm|
|Size of working table ||1250*950mm|
|X axis travel ||1300mm|
|Y axis travel ||1050mm|
|Z axis travel ||1300mm|
|Drilling cutting feed rate ||10-250mm|
|Max rotary speed of spindle ||7000rpm|
|Spindle motor ||(servo)7.5-11kw|
|Moving motor from right to left on work table ||servo 3.0kw |
|Moving motor from up to down on spindle||servo 2.0 kw |
|Moving the motor from front to back on spindle ||servo 1.5kw |
|Pressure of cutting pressure pump ||80 kgf/cm²|
|Oil mass of oil pressure pump ||6-60 L/min|
|Capacity of cutting oil tank ||700 L|
|load capacity of working table ||8000kgs |
|machine net weight ||10500kgs |
|Machine power ||27kw |
Fanuc or Mistubishi controller
Spindle oil cooler + NSK Bearing
gundrill + precision guide sleeve and rubber guide
HIWIN linear way