Payment & Shipping Terms:
|Name:||Flat Bed CNC Lathe Machine CKI6150||Turret Center Height:||145mm|
|Tailstock Shaft Diameter:||75mm||Tailstock Shaft Travel:||150mm|
|Tailstock Shaft Taper:||MT5||Positioning Accuracy:||0.01mm|
Cnc Turning Center Machine,
Lathe CNC Machine
75mm Tailstock Shaft Diameter Flant Type CNC Lathe Machine CKI6150
1. Adopting the 980TDI CNC system, in addition to the traditional RS-232 interface, it also supports U disk transmission, speeding up the program transmission speed; the operation is also more convenient
2. Servo motor adopts a large number of motors, featuring large torque and fast response.
3. Guide rails and ball screws adopt a centralized automatic lubrication system, which can periodically and quantitatively inject oil to each lubrication part to ensure uniform lubrication of each moving surface, effectively reducing frictional resistance, improving movement accuracy, and ensuring the service life of guide rails and ball screws.
1. It is made from the whole cast-iron, which is heavy enough with good rigidity and
2. Three gears controlled by a handle, stepless speed regulation, with lower noise and
high- standard machining accuracy, is an environmental- protective machine.
3. The spindle is the high- rotate speed and sophisticated bearing with smooth surface.
The extra size diameter of the spindle bore is φ82mm while the diameter of chuck is
4. The machine through the numerical control system could automatically process the inside and outside cylinder surface, cone surface, circular, arc surface, end face etc. Also can process the single and multiple threads in metric, inch and other standards.
Specification Of Flat Bed CNC Lathe Machine CKI6150
|Max swing over table||mm||500|
|Max swing diameter over carriage||mm||290|
|Max processing length||mm||1500|
|X axis Travel||mm||295|
|Z axis Travel||mm||1300|
|Spindle through hole diameter||mm||82|
|Spindle rotation speed||rpm||
Spindle 3 grades gear box:45-180, 180-750, 600-1600r/min
manual 24 grades, 9-1600r/min
|Servo motor connection type||Direct connection|
|X axis rapid feed||m/min||6|
|Z axis rapid feed||m/min||8|
|Turret center height||mm||≤145|
|Tailstock Shaft diameter*travel||mm||φ75*120|
GSK 980TDi Controller system, servo motor and driving
Cutting fluid system
Auto lubrication system
4 position electronic turret+3 jaw chuck
Tools and toolbox
3 jaw hydraulic chuck
Auto feed bar
Contact Person: sales