|
Product Details:
Payment & Shipping Terms:
|
| Name: | Vertical Machine Center | Spindle Motor: | 7.5kw |
|---|---|---|---|
| T Slot Of Table: | 5-18*100 | X/Y/Z Axis Ball Screw Size: | 3616 |
| X/Y/Z Axis Guide Way: | 35(ball Screw) | ATC Type: | 24tools |
| Time Of Chaning Tool: | 2.5S | Rapid Feed: | 48*48*48m/min |
| Highlight: | vmc cnc milling machine,cnc moulding machine |
||
High speed CNC machine center for parts and mold metal cutting
1. Roundness, squareness and dimensional deviation of V85P, are 25% higher than V85.
2. V85P machine over-cutting is less than 0.15mm in High feed (F8000) Cutting. Most of the current machine
tool in this feed cutting are 0.2mm, processing efficiency than V85 improved by nearly 10%.
3. The tapping efficiency is the same as V85 Machine, but V85P has smaller tapping error.
4. V85P Machine’s 3D curved surface precision, V85P processing efficiency is more 30% higher than V85 at
same processing precision requirement.
5. The effect of V85P on the composite curved surface is obviously better than that of V85 and VMC850,
processing tool marks, quadrant points, and gear marks are all within 0.005mm.The s-grain and broach
phenomenon are basically cleared.
6. Heavy cutting capacity of V85P is much stronger than V85, The cutting depth of V85P is 0.5mm deeper
than V85’S for using diameter 63mm cutter with Max cutting depth same configure.
| Model | V85P |
| Table size | 1000*550mm |
| X axis Travel | 800mm |
| Y aixs Travel | 500mm |
| Z axis Travel | 500mm |
| Distance between spindle and table | 160-660mm |
| Distance between spindle and column | 524mm |
| Spindle rotation speed | 10000 /Direct connection 12000/15000rpm |
| Spindle motor | 7.5kw |
| Work table T slot | 5-18*100 |
| X/Y/Z axis ball screw size | 3616 |
| ATC type | 24too arm type |
| Time of changing tool | 2.5m/min |
| Rapid feed | 48*48*48m/min |
| X/Y/Z axis motor | 12/12/20NM |
| Max cutting feed | 10m/min |
| Min set moving unit | 0.001mm |
| Dimension | 2650*2900*2850mm |
| Net weight | 5000kgs |
| Max load of table | 600kgs |
1. Fanuc Controller system 2. 10000/12000/15000Rpm spindle
3. 24T arm type tool magazine 3. Spindle oil cooler
4. Heat exchanger 5. Full enclosed cover
6. Spindle encoder position system 7. Three axis inner encoder feedback system
8. Auto lubrication system 9. Pneumatic system
10. RS 232 Interface 11.Operation unit
12. RS232 Interface 13. Working light
14. Tool and tool box
1. Screw type chip conveyor
2. Chain type chip conveyor
Contact Person: Miss. LISA XIAO
Tel: +86-15218746521
Fax: 86-0755-84686150
