Payment & Shipping Terms:
|Rotation Speed:||80-5440rpm||Name:||Turret Milling Machine|
|X Axis Travel:||1000mm||Y Axis Travel:||440mm|
|Z Axis Travel:||390mm||Spindle Taper:||R8(NT30)|
|Spindle Power:||3HP||Table Size:||1370*254*90mm|
turret head milling machine,
vertical turret mill
Turret milling machine Taiwan original milling head
1. HT-250 resin sand is used for the body casting material and other large parts, and the table is HT-300
resin sand. The surface hardness of the Joint milling machine worktable and guide surface should be
increased from HRC-45 to 48 degree.
2. Machine body wall thickness (measured) 12MM.
3. Imported from Taiwan original milling head, Japan NSK P4 precision and spindle bearings, high precision
spindle, spindle tolerance within 0.003mm.
2. Spindle tolerance measured is less than 0.005mm, and Joint standard is 0.02/300, and full travel is less
than 0.04mm. The standard of Joint milling machine is 20% higher than industry.
3. Suitable for electronic parts, holes, slots, frame and mold processing.
4. Spindle tolerance:0.002mm
|X axis travel||1000mm|
|Y axis travel||440mm|
|Z axis travel||390mm|
|Travel of spindle quill||127mm|
|Max distance from the spindle nose to table||420mm|
|Spindle rotation speed||
|Spindle Rated power||3HP|
|Tilt angle Forward and backward||±45°|
|Tilt angel left and right||±90°|
Contact Person: sales